功能丰富 实时交流
移动端访问更便捷
订阅获取更多服务
关注获取更多资讯
实时接收采购订单
参考价 | 面议 |
喜彩平台
喜彩平台
公司名称︰湖南环辰泰瑞电气设备有限公司
西门子(中国)*代理商 倾心为您提供西门子*产品。
来函洽谈业务,期待与您的*合作。
︰
传真︰
联 系 人︰黎晓蓉 ()
︰
工作 ︰2425992014
西门子通讯卡 西门子网卡 介绍:
每台 PG/PC/笔记本电脑上只能使用一个 CP。 每个CP 只能使用一个相同的协议 (PROFIBUS DP, S7 通信或者 FDL)。The CP 5612 permits the connection of programming devices (PGs) and PCs to PROFIBUS and to the multipoint interface (MPI) of the SIMATIC S7:The CP 5612 is operated under various software packages and offers the user the opportunity of performing functions of the programming devices and PCs by means of PROFIBUS and the multipoint interface (MPI).
Only one CP can be used per PG or PC. Similarly only one protocol (PROFIBUS DP, S7 communication or FDL) can be used per CP.CP 5621 可在各种软件包中运行,它可使用户通过 PROFIBUS 和多点接口 (MPI) 来执行编程设备与 PC 的功能。每台编程器或PC上只能使用一个通讯处理器。每个CP 只能使用一个相同的协议 (PROFIBUS DP, S7 通讯或者 FDL)。CP 5611 可在不同的软件包下操作,并且允许用户通过 PROFIBUS 和 多点式接口 (MPI) 执行编程设备功能和个人电脑的功能。
参数:
CP 5603 作为 PROFIBUS DP 主站运行,它将过程影象(输入数据、输出数据和诊断数据)存储在双端口 RAM 内(CP 的存储区)。 CP 5603 的硬件独立执行与 PROFIBUS 从站的高性能数据交换。用户直接访问双端口 RAM。 从站的过程数据总是*性的,即用户从一个相同的循环周期中得到数据。
该软件保证 SIMATIC S5/S7(SIMATIC S5-95U 除外)控制器通过与 STEP5/STEP7 连接的 PROFIBUS 编程。安装 CP 5603(DP-Base)后可以进行基于 CP 5603 的编程器/OP 通讯。 无需另外的软件包。
概述:
PCI 卡(通用键 5 V/3.3 V),自身带微处理器,用于将 PC 和 SIMATIC 编程器/PC 连接到 PROFIBUS,zui高速度 12 Mbit/s使用 CP 5613 A2,可以连接带有 PCI 插槽的 SIMATIC PG/PC 到光学 PROFIBUS。CP 5613 A2 为 PC 上的控制任务提供高性能的支持(基于 PC 机的控制,数字控制,机器人控制)。当 CP 5613 A2 用作 DP 主站、DP 从站或应用在 PROFIBUS DP 上的编程器1)FMS-5613 zui多支持两个 CP 5613 A2/5614 A2。CP 5613 A2 作为 PROFIBUS DP 主站运行,它将过程映象(输入数据、输出数据和诊断数据)存储在 DP-RAM 内(CP 的存储区)。 CP 5613 A2 硬件独立地和 PROFIBUS 从站进行高性能的数据交换。 用户直接访问双端口 RAM。 从站的过程数据总是*的,例如用户从同一个 DP 循环获得数据
Order number | 6GK1562-3AA00 | |
---|---|---|
Product type designation | CP 5623 | |
Transmission rate | ||
Transfer rate | ||
| 9.6 kbit/s ... 12 Mbit/s | |
Interfaces | ||
Number of electrical connections | ||
| 1 | |
Type of electrical connection | ||
| 9-pin Sub-D socket (RS 485) | |
Supply voltage, current consumption, power loss | ||
Type of voltage of the supply voltage | DC | |
Supply voltage | ||
| 3.3 V | |
| 12 V | |
Relative symmetrical tolerance for DC | ||
| 9 % | |
| 8 % | |
Consumed current | ||
| 0.72 A | |
| 0.25 A | |
Active power loss | 5.4 W | |
Permitted ambient conditions | ||
Ambient temperature | ||
| 5 ... 60 °C | |
| -20 ... +60 °C | |
| -20 ... +60 °C | |
Relative humidity at 25 °C without condensation during operation maximum | 85 % | |
Protection class IP | IP00 | |
Design, dimensions and weight | ||
Module format | PCI Express x1 (half length) | |
Width | 21.6 mm | |
Height | 126.3 mm | |
Depth | 180.5 mm | |
Net weight | 102 g | |
Number of plug-in cards of same design plug-in per PC station | 4 | |
Number of units Note | FMS-5613 supports up to two CP 5603 / CP 5613 A2 / CP 5614 A2 / CP 5623 / CP 5624 processors | |
Performance data | ||
Performance data open communication | ||
Software for open communication by means of SEND/RECEIVE required | FDL driver included in scope of delivery of the CP | |
Number of possible connections for open communication by means of SEND/RECEIVE maximum | 80 | |
Performance data PROFIBUS DP | ||
Software for DP master function required | No | |
Service as DP master | ||
| Yes | |
| Yes | |
| Yes | |
Number of DP slaves on DP master usable | 124 | |
Amount of data | ||
| 30 256 byte | |
| 30 256 byte | |
| 244 byte | |
| 244 byte | |
| 244 byte | |
Software for DP slave function required | No | |
Service as DP slave | ||
| Yes | |
| Yes | |
Amount of data | ||
| 244 byte | |
| 244 byte | |
Performance data FMS functions | ||
Software for FMS communication required | Yes, FMS-5613 | |
Number of possible connections for FMS connection maximum | 40 | |
Performance data S7 communication | ||
Software for S7 communication required | Yes, HARDNET-PB S7 (S7-5613) | |
Number of possible connections for S7/PG communication maximum | 50 | |
Performance data multi-protocol mode | ||
Number of active connections with multi-protocol mode | 50 | |
Number of configurable connections per PC station | 207 | |
Product functions management, configuration | ||
Configuration software required | Included in scope of supply | |
Product functions Diagnosis | ||
Product function | ||
| Yes | |
Standards, specifications, approvals | ||
Standard | ||
| 2004/108/EC | |
| CAN/CSA C22.2 & UL 60950-1 | |
| EN 61000-6-3, EN 61000-6-4 | |
| EN 61000-6-1, EN 61000-6-2 | |
Certificate of suitability | ||
| Yes | |
| Yes |
DP-Base 和 DP5613 软件的并行运行是不允许的
CP 5613 A2 作为 1 类 DP 主站运行,符合 IEC 61158/EN 50170 标准,并可*独立地处理分布式站(DP 从站)的数据通讯。以固定的,重复地报文循环,*控制器与 DP 从站(例如 ET 200S)交换信息。 DP编程接口(DP Lib,DLL)为PC编程器提供传输数据的功能调用。 此外,DP接口提供SYNC和FREEZE以及从站的起动和释放等功能。
名称 | 订货号 | 货期 |
IE/PBLINK | 6GK1411-5AB00 | 6-8周 |
IEFCRJ45接头 | 6GK1901-1BB10-2AA0 | 现货 |
IEFCRJ45接头(10个) | 6GK1901-1BB10-2ABO | 现货 |
RS485总线插头 | 6GK1500-0EA02 | 现货 |
RS485总线插头180度 | 6GK1500-0FC10 | 现货 |
PROFIBUSOBT | 6GK1500-3AA00 | 现货 |
OLM/P11模块 | 6GK1503-2CA00 | 6-8周 |
OLM/P12模块 | 6GK1503-3CA00 | 现货 |
OLM/G11模块 | 6GK1503-2CB00 | 现货 |
OLM/G12模块 | 6GK1503-3CB00 | 现货 |
OLM/G11-1300模块 | 6GK1503-2CC00 | 6-8周 |
OLM/G12-1300模块 | 6GK1503-3CC00 | 6-8周 |
CP5512 | 6GK1551-2AA00 | 现货 |
CP5611 | 6GK1561-1AA01 | 现货 |
CP5621 | 6GK1562-1AA00 | 现货 |
CP5611-MPI | 6GK1561-1AM01 | 现货 |
CP5621-MPI | 6GK1562-1AM00 | 现货 |
CP5613 | 6GK1561-3AA01 | 现货 |
CP5613FO | 6GK1561-3FA00 | 6-8周 |
CP5614 | 6GK1561-4AA01 | 6-8周 |
CP5614 | 6GK1561-4FA00 | 转备件 |
CP1512 | 6GK1151-2AA00 | 6-8周 |
CP1613 | 6GK1161-3AA01 | 现货 |
CP1623 | 6GK1162-3AA00 | 现货 |
CP1616 | 6GK1161-6AA00 | 6-8周 |
通用以太网卡/S7驱动2008 | 6GK1704-1CW71-3AA0 | 6-8周 |
S7-1613驱动2008 | 6GK1716-1CB71-3AA0 | 6-8周 |
S7-1613冗余驱动2008 | 6GK1716-0HB71-3AA0 | 6-8周 |
BFOC连接器(1包20) | 6GK1901-0DA20-0AA0 | 6-8周 |
ITP连接器/9 | 6GK1901-0CA00-0AA0 | 6-8周 |
ITP连接器/15 | 6GK1901-0CA01-0AA0 | 6-8周 |
SPLITCONNECT端子 | 6GK1905-0AD00 | 现货 |
PROFIBUSM12插针 | 6GK1905-0EA00 | 现货 |
PROFIBUSM12接口 | 6GK1905-0EB00 | 现货 |
7、8”插接连接器插针 | 6GK1905-0FA00 | 现货 |
7、8”插接连接器接口 | 6GK1905-0FB00 | 现货 |
三通插头 | 6GK1905-0AA00 | 现货 |
PROFIBUS剥线工具 | 6GK1905-6AA00 | 现货 |
快速连接刀片盒 | 6GK1905-6AB00 | 现货 |
剥线工具包 | 6GK1905-6PA10 | 6-8周 |
SCALANCEXB005 | 6GK5005-0BA00-1AB2 | 现货 |
SCALANCEXB008 | 6GK5008-0BA00-1AB2 | 6-8周 |
SCALANCEXB004-1 | 6GK5004-1BD00-1AB2 | 6-8周 |
SCALANCEXB004-1LD | 6GK5004-1BF00-1AB2 | 6-8周 |
SCALANCEX101-1 | 6GK5101-1BB00-2AA3 | 现货 |
SCALANCEX101-1LD | 6GK5101-1BC00-2AA3 | 6-8周 |
SCALANCEX108 | 6GK5108-0BA00-2AA3 | 现货 |
SCALANCEX106-1 | 6GK5106-1BB00-2AA3 | 现货 |
SCALANCEX104-2 | 6GK5104-2BB00-2AA3 | 6-8周 |
SCALANCEX112-2 | 6GK5112-2BB00-2AA3 | 6-8周 |
SCALANCEX116 | 6GK5116-0BA00-2AA3 | 6-8周 |
SCALANCEX124 | 6GK5124-0BA00-2AA3 | 6-8周 |
SCALANCEX204-2LD | 6GK5204-2BC10-2AA3 | 现货 |
SCALANCEX206-1LD | 6GK5206-1BC10-2AA3 | 6-8周 |
SCALANCEX204IRT | 6GK5204-0BA00-2BA3 | 6-8周 |
SCALANCEX202-2IRT | 6GK5202-2BB00-2BA3 | 6-8周 |
SCALANCEX204-2 | 6GK5204-2BB10-2AA3 | 现货 |
SCALANCEX206-1 | 6GK5206-1BB10-2AA3 | 现货 |
SCALANCEX208 | 6GK5208-0BA10-2AA3 | 现货 |
SCALANCEX208PRO | 6GK5208-0HA00-2AA6 | 6-8周 |
SCALANCEX212-2 | 6GK5212-2BB00-2AA3 | 6-8周 |
SCALANCEX212-2LD | 6GK5212-2BC00-2AA3 | 6-8周 |
SCALANCEX216 | 6GK5216-0BA00-2AA3 | 6-8周 |
SCALANCEX224 | 6GK5224-0BA00-2AA3 | 6-8周 |
SCALANCEX307-3 | 6GK5307-3BL00-2AA3 | 6-8周 |
SCALANCEX308-2 | 6GK5308-2FL00-2AA3 | 6-8周 |
SCALANCEX310百兆 | 6GK5310-0BA00-2AA3 | 6-9周 |
SCALANCEX310千兆 | 6GK5310-0FA00-2AA3 | 6-10周 |
SCALANCEX-414-3E | 6GK5414-3FC00-2AA2 | 6-8周 |
扩展模块EM495-8 | 6GK5495-8BA00-8AA2 | 6-8周 |
SCALANCEX408-2 | 6GK5408-2FD00-2AA2 | 6-8周 |
MEDIAMODULEMM492-2LD | 6GK5492-2AM00-8AA2 | 6-8周 |
MEDIAMODULEMM492-2 | 6GK5492-2AL00-8AA2 | 6-8周 |
MEDIAMODULEMM491-2 | 6GK5491-2AB00-8AA2 | 6-8周 |
MEDIAMODULEMM491-2LD | 6GK5491-2AC00-8AA2 | 6-8周 |
主站 Class 1 的 DP 功能扩展,支持非循环“读”和“写”功能(DS_READ,DS_WRITE)以及和循环数据并行执行的报警确认(ALARM_ACK)。与循环测量值相比、非循环传输的数据(例如参数化数据)不经常变动,与快速循环的有用数据传输相比较,它以较低的优先级发送。 主站中的中断确认,保证了从 DP 从站来的中断的可靠传输DP-Base和DP -5613软件的并行运行是不允许的。基于 FDL 接口 的发送/接收,安装 CP 5613 A2(DP-BASE)后,就可以为数据传送、诊断和管理提供服务。无需另外的软件包。
采用 Siemens 产品和系统进行工业通信可在公司范围内确保实现更高的效率。我们的*组件(如 SIMATIC NET)以经过实践验证的标准为基础,可帮助您实现功能强大且具有“前瞻性”的集成数据网络。从简单的传感器连接到工厂范围的质量和生产数据采集与传输 - 我们的综合全面的工业通信解决方案能够将所有公司区域有效集成到一个协调*的系统中。
Critical factors of success for device manufacturers
总述:
But what are the critical factors of success for device manufacturers? Which differentiating criteria will determine PROFINET sales and market shares in the long term? In answering these questions, factors such as performance, support and costs play an essential role.
西门子通讯卡 西门子网卡 介绍:
每台 PG/PC/笔记本电脑上只能使用一个 CP。 每个CP 只能使用一个相同的协议 (PROFIBUS DP, S7 通信或者 FDL)。The CP 5612 permits the connection of programming devices (PGs) and PCs to PROFIBUS and to the multipoint interface (MPI) of the SIMATIC S7:The CP 5612 is operated under various software packages and offers the user the opportunity of performing functions of the programming devices and PCs by means of PROFIBUS and the multipoint interface (MPI).
Only one CP can be used per PG or PC. Similarly only one protocol (PROFIBUS DP, S7 communication or FDL) can be used per CP.CP 5621 可在各种软件包中运行,它可使用户通过 PROFIBUS 和多点接口 (MPI) 来执行编程设备与 PC 的功能。每台编程器或PC上只能使用一个通讯处理器。每个CP 只能使用一个相同的协议 (PROFIBUS DP, S7 通讯或者 FDL)。CP 5611 可在不同的软件包下操作,并且允许用户通过 PROFIBUS 和 多点式接口 (MPI) 执行编程设备功能和个人电脑的功能。
参数:
CP 5603 作为 PROFIBUS DP 主站运行,它将过程影象(输入数据、输出数据和诊断数据)存储在双端口 RAM 内(CP 的存储区)。 CP 5603 的硬件独立执行与 PROFIBUS 从站的高性能数据交换。用户直接访问双端口 RAM。 从站的过程数据总是*性的,即用户从一个相同的循环周期中得到数据。
该软件保证 SIMATIC S5/S7(SIMATIC S5-95U 除外)控制器通过与 STEP5/STEP7 连接的 PROFIBUS 编程。安装 CP 5603(DP-Base)后可以进行基于 CP 5603 的编程器/OP 通讯。 无需另外的软件包。
概述:
PCI 卡(通用键 5 V/3.3 V),自身带微处理器,用于将 PC 和 SIMATIC 编程器/PC 连接到 PROFIBUS,zui高速度 12 Mbit/s使用 CP 5613 A2,可以连接带有 PCI 插槽的 SIMATIC PG/PC 到光学 PROFIBUS。CP 5613 A2 为 PC 上的控制任务提供高性能的支持(基于 PC 机的控制,数字控制,机器人控制)。当 CP 5613 A2 用作 DP 主站、DP 从站或应用在 PROFIBUS DP 上的编程器1)FMS-5613 zui多支持两个 CP 5613 A2/5614 A2。CP 5613 A2 作为 PROFIBUS DP 主站运行,它将过程映象(输入数据、输出数据和诊断数据)存储在 DP-RAM 内(CP 的存储区)。 CP 5613 A2 硬件独立地和 PROFIBUS 从站进行高性能的数据交换。 用户直接访问双端口 RAM。 从站的过程数据总是*的,例如用户从同一个 DP 循环获得数据
Order number | 6GK1562-3AA00 | |
---|---|---|
Product type designation | CP 5623 | |
Transmission rate | ||
Transfer rate | ||
| 9.6 kbit/s ... 12 Mbit/s | |
Interfaces | ||
Number of electrical connections | ||
| 1 | |
Type of electrical connection | ||
| 9-pin Sub-D socket (RS 485) | |
Supply voltage, current consumption, power loss | ||
Type of voltage of the supply voltage | DC | |
Supply voltage | ||
| 3.3 V | |
| 12 V | |
Relative symmetrical tolerance for DC | ||
| 9 % | |
| 8 % | |
Consumed current | ||
| 0.72 A | |
| 0.25 A | |
Active power loss | 5.4 W | |
Permitted ambient conditions | ||
Ambient temperature | ||
| 5 ... 60 °C | |
| -20 ... +60 °C | |
| -20 ... +60 °C | |
Relative humidity at 25 °C without condensation during operation maximum | 85 % | |
Protection class IP | IP00 | |
Design, dimensions and weight | ||
Module format | PCI Express x1 (half length) | |
Width | 21.6 mm | |
Height | 126.3 mm | |
Depth | 180.5 mm | |
Net weight | 102 g | |
Number of plug-in cards of same design plug-in per PC station | 4 | |
Number of units Note | FMS-5613 supports up to two CP 5603 / CP 5613 A2 / CP 5614 A2 / CP 5623 / CP 5624 processors | |
Performance data | ||
Performance data open communication | ||
Software for open communication by means of SEND/RECEIVE required | FDL driver included in scope of delivery of the CP | |
Number of possible connections for open communication by means of SEND/RECEIVE maximum | 80 | |
Performance data PROFIBUS DP | ||
Software for DP master function required | No | |
Service as DP master | ||
| Yes | |
| Yes | |
| Yes | |
Number of DP slaves on DP master usable | 124 | |
Amount of data | ||
| 30 256 byte | |
| 30 256 byte | |
| 244 byte | |
| 244 byte | |
| 244 byte | |
Software for DP slave function required | No | |
Service as DP slave | ||
| Yes | |
| Yes | |
Amount of data | ||
| 244 byte | |
| 244 byte | |
Performance data FMS functions | ||
Software for FMS communication required | Yes, FMS-5613 | |
Number of possible connections for FMS connection maximum | 40 | |
Performance data S7 communication | ||
Software for S7 communication required | Yes, HARDNET-PB S7 (S7-5613) | |
Number of possible connections for S7/PG communication maximum | 50 | |
Performance data multi-protocol mode | ||
Number of active connections with multi-protocol mode | 50 | |
Number of configurable connections per PC station | 207 | |
Product functions management, configuration | ||
Configuration software required | Included in scope of supply | |
Product functions Diagnosis | ||
Product function | ||
| Yes | |
Standards, specifications, approvals | ||
Standard | ||
| 2004/108/EC | |
| CAN/CSA C22.2 & UL 60950-1 | |
| EN 61000-6-3, EN 61000-6-4 | |
| EN 61000-6-1, EN 61000-6-2 | |
Certificate of suitability | ||
| Yes | |
| Yes |
DP-Base 和 DP5613 软件的并行运行是不允许的
CP 5613 A2 作为 1 类 DP 主站运行,符合 IEC 61158/EN 50170 标准,并可*独立地处理分布式站(DP 从站)的数据通讯。以固定的,重复地报文循环,*控制器与 DP 从站(例如 ET 200S)交换信息。 DP编程接口(DP Lib,DLL)为PC编程器提供传输数据的功能调用。 此外,DP接口提供SYNC和FREEZE以及从站的起动和释放等功能。
名称 | 订货号 | 货期 |
IE/PBLINK | 6GK1411-5AB00 | 6-8周 |
IEFCRJ45接头 | 6GK1901-1BB10-2AA0 | 现货 |
IEFCRJ45接头(10个) | 6GK1901-1BB10-2ABO | 现货 |
RS485总线插头 | 6GK1500-0EA02 | 现货 |
RS485总线插头180度 | 6GK1500-0FC10 | 现货 |
PROFIBUSOBT | 6GK1500-3AA00 | 现货 |
OLM/P11模块 | 6GK1503-2CA00 | 6-8周 |
OLM/P12模块 | 6GK1503-3CA00 | 现货 |
OLM/G11模块 | 6GK1503-2CB00 | 现货 |
OLM/G12模块 | 6GK1503-3CB00 | 现货 |
OLM/G11-1300模块 | 6GK1503-2CC00 | 6-8周 |
OLM/G12-1300模块 | 6GK1503-3CC00 | 6-8周 |
CP5512 | 6GK1551-2AA00 | 现货 |
CP5611 | 6GK1561-1AA01 | 现货 |
CP5621 | 6GK1562-1AA00 | 现货 |
CP5611-MPI | 6GK1561-1AM01 | 现货 |
CP5621-MPI | 6GK1562-1AM00 | 现货 |
CP5613 | 6GK1561-3AA01 | 现货 |
CP5613FO | 6GK1561-3FA00 | 6-8周 |
CP5614 | 6GK1561-4AA01 | 6-8周 |
CP5614 | 6GK1561-4FA00 | 转备件 |
CP1512 | 6GK1151-2AA00 | 6-8周 |
CP1613 | 6GK1161-3AA01 | 现货 |
CP1623 | 6GK1162-3AA00 | 现货 |
CP1616 | 6GK1161-6AA00 | 6-8周 |
通用以太网卡/S7驱动2008 | 6GK1704-1CW71-3AA0 | 6-8周 |
S7-1613驱动2008 | 6GK1716-1CB71-3AA0 | 6-8周 |
S7-1613冗余驱动2008 | 6GK1716-0HB71-3AA0 | 6-8周 |
BFOC连接器(1包20) | 6GK1901-0DA20-0AA0 | 6-8周 |
ITP连接器/9 | 6GK1901-0CA00-0AA0 | 6-8周 |
ITP连接器/15 | 6GK1901-0CA01-0AA0 | 6-8周 |
SPLITCONNECT端子 | 6GK1905-0AD00 | 现货 |
PROFIBUSM12插针 | 6GK1905-0EA00 | 现货 |
PROFIBUSM12接口 | 6GK1905-0EB00 | 现货 |
7、8”插接连接器插针 | 6GK1905-0FA00 | 现货 |
7、8”插接连接器接口 | 6GK1905-0FB00 | 现货 |
三通插头 | 6GK1905-0AA00 | 现货 |
PROFIBUS剥线工具 | 6GK1905-6AA00 | 现货 |
快速连接刀片盒 | 6GK1905-6AB00 | 现货 |
剥线工具包 | 6GK1905-6PA10 | 6-8周 |
SCALANCEXB005 | 6GK5005-0BA00-1AB2 | 现货 |
SCALANCEXB008 | 6GK5008-0BA00-1AB2 | 6-8周 |
SCALANCEXB004-1 | 6GK5004-1BD00-1AB2 | 6-8周 |
SCALANCEXB004-1LD | 6GK5004-1BF00-1AB2 | 6-8周 |
SCALANCEX101-1 | 6GK5101-1BB00-2AA3 | 现货 |
SCALANCEX101-1LD | 6GK5101-1BC00-2AA3 | 6-8周 |
SCALANCEX108 | 6GK5108-0BA00-2AA3 | 现货 |
SCALANCEX106-1 | 6GK5106-1BB00-2AA3 | 现货 |
SCALANCEX104-2 | 6GK5104-2BB00-2AA3 | 6-8周 |
SCALANCEX112-2 | 6GK5112-2BB00-2AA3 | 6-8周 |
SCALANCEX116 | 6GK5116-0BA00-2AA3 | 6-8周 |
SCALANCEX124 | 6GK5124-0BA00-2AA3 | 6-8周 |
SCALANCEX204-2LD | 6GK5204-2BC10-2AA3 | 现货 |
SCALANCEX206-1LD | 6GK5206-1BC10-2AA3 | 6-8周 |
SCALANCEX204IRT | 6GK5204-0BA00-2BA3 | 6-8周 |
SCALANCEX202-2IRT | 6GK5202-2BB00-2BA3 | 6-8周 |
SCALANCEX204-2 | 6GK5204-2BB10-2AA3 | 现货 |
SCALANCEX206-1 | 6GK5206-1BB10-2AA3 | 现货 |
SCALANCEX208 | 6GK5208-0BA10-2AA3 | 现货 |
SCALANCEX208PRO | 6GK5208-0HA00-2AA6 | 6-8周 |
SCALANCEX212-2 | 6GK5212-2BB00-2AA3 | 6-8周 |
SCALANCEX212-2LD | 6GK5212-2BC00-2AA3 | 6-8周 |
SCALANCEX216 | 6GK5216-0BA00-2AA3 | 6-8周 |
SCALANCEX224 | 6GK5224-0BA00-2AA3 | 6-8周 |
SCALANCEX307-3 | 6GK5307-3BL00-2AA3 | 6-8周 |
SCALANCEX308-2 | 6GK5308-2FL00-2AA3 | 6-8周 |
SCALANCEX310百兆 | 6GK5310-0BA00-2AA3 | 6-9周 |
SCALANCEX310千兆 | 6GK5310-0FA00-2AA3 | 6-10周 |
SCALANCEX-414-3E | 6GK5414-3FC00-2AA2 | 6-8周 |
扩展模块EM495-8 | 6GK5495-8BA00-8AA2 | 6-8周 |
SCALANCEX408-2 | 6GK5408-2FD00-2AA2 | 6-8周 |
MEDIAMODULEMM492-2LD | 6GK5492-2AM00-8AA2 | 6-8周 |
MEDIAMODULEMM492-2 | 6GK5492-2AL00-8AA2 | 6-8周 |
MEDIAMODULEMM491-2 | 6GK5491-2AB00-8AA2 | 6-8周 |
MEDIAMODULEMM491-2LD | 6GK5491-2AC00-8AA2 | 6-8周 |
主站 Class 1 的 DP 功能扩展,支持非循环“读”和“写”功能(DS_READ,DS_WRITE)以及和循环数据并行执行的报警确认(ALARM_ACK)。与循环测量值相比、非循环传输的数据(例如参数化数据)不经常变动,与快速循环的有用数据传输相比较,它以较低的优先级发送。 主站中的中断确认,保证了从 DP 从站来的中断的可靠传输DP-Base和DP -5613软件的并行运行是不允许的。基于 FDL 接口 的发送/接收,安装 CP 5613 A2(DP-BASE)后,就可以为数据传送、诊断和管理提供服务。无需另外的软件包。
采用 Siemens 产品和系统进行工业通信可在公司范围内确保实现更高的效率。我们的*组件(如 SIMATIC NET)以经过实践验证的标准为基础,可帮助您实现功能强大且具有“前瞻性”的集成数据网络。从简单的传感器连接到工厂范围的质量和生产数据采集与传输 - 我们的综合全面的工业通信解决方案能够将所有公司区域有效集成到一个协调*的系统中。
Critical factors of success for device manufacturers
总述:
But what are the critical factors of success for device manufacturers? Which differentiating criteria will determine PROFINET sales and market shares in the long term? In answering these questions, factors such as performance, support and costs play an essential role.
*您想获取产品的资料:
个人信息: