241聚酰亚胺薄膜压敏胶带(丙烯酸)
产品简介:
241聚酰亚胺薄膜压敏胶带(丙烯酸) 是在聚酰亚胺薄膜单面涂以丙烯酸压敏胶粘剂制成的。具有一定的表面自粘性,剥离强度,内聚力及一定的剪切强度。适用于各种大型的电机、电器、电缆及电子产品绝缘。标准号:Q/12YJ4212-2005
产品参数:
1、外观:
胶带盘面应平整、无气泡、无流胶、胶层均匀。开卷时胶层不转移,边比整齐无破损。
2、尺寸:
2.1 胶带长度:每卷总长度30-60米或根据用户要求提供。
2.2 胶带宽度:宽度为10mm-50mm,偏差为±0.5mm。宽度大于50mm的胶带,偏差为±1.0mm;可根据用户要求提供各种规格的胶带。
2.3 胶带的厚度与允许偏差:根据用户的要求可供给各种厚度的胶带,允许偏差:±0.008mm。
3、胶带性能要求:
序号 | 项目名称 | 单位 | 指标 |
1 | 拉伸强度 | MPa | ≥70 |
241 Polyimide Pressure Sensitive Adhesive Tape with Acrylic Resin
Standard No. Q/12YJ4212-2005
This kind of tape is made of polyimide material with acrylic adhesive, which shows excellent dielectric insulation properties, high heat resistant and is widely used for electrical insulation on motor, transformer, coils and so on. I
I requirements:
1 Appearance
The film surface is smooth, bright and clean. It should have no defects such as folding, tearing, particulate, air bubble, pinhole and any external impurity. Its edges shall be orderly and no breakage.
2 Dimension
The roll length is 30-60 meter or supplied according to the customer’s requirements. The width and allowable deviation: 10mm-50mm: ±0.5mm; >50mm: ±1mm.
3 Thickness
Thickness and allowable deviation: all of the thickness is available, ±0.008mm.
No. | Index | Unit | Standard |
1 | Tensile | Mpa | ≥ 70 |
2 | Elongation | % | ≥30 |
3 | Peeling Tape to tape Tape to copper | N/10mm N/10mm | ≥1.2 ≥1.2 |
4 | Breakdown strength | MV/m | ≥90 |
5 | Working temperature | ℃ | -70---+180 |
ont-kerning:0pt'>
****************************************
公司名称:万喜堂彩票
公司地址:江苏省扬州市宝应经济开发区
:
传 真:
客 服 2623069988
微 信 号:JGDQ88888
电子:
联 系 人:陈
****************************************
详情请浏览:http://www.wjfhcx。。com
****************************************
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,万喜堂彩票注册网站对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。