万喜堂彩票 
万喜堂彩票
| 暂无信息 |
万喜堂app下载老虎机 强力型半衬硬密封陶瓷球阀(CeramicHalf-linedHard-sealingvalve)规格及连接尺寸请参考全衬硬密封陶瓷球阀数据表ConnectionDimensionsaretheSameWiththeCeramicFully-linedHard-sealingBallValve(Page08)特点（Features）阀门壳体经过硬化加固加厚处理
万喜堂app下载老虎机 强力型半衬硬密封陶瓷球阀
(Ceramic Half-lined Hard-sealing valve)
规格及连接尺寸请参考全衬硬密封陶瓷球阀数据表
Connection Dimensions are the Same With the Ceramic Fully-lined Hard-sealing Ball Valve(Page08)
特点（Features）
阀门壳体经过硬化加固加厚处理，（超过国家标准GB、JB,美标ANSI的标准数据要求）。分三段二段结构。衬阀门的使用要求制造。
壳体加强，阀门不会因重力而扭曲锁死。（陶瓷阀芯内部要求精度公差超过国家标准的精确度）。阀门流通顺滑，特别为含杂质纤维、粘糊将料、高度颗粒介质而设计。适用于硅粉、镁粉、石灰的输送排放。产品以国标，美标为主。也可依客户需要制造非标产品。
The valve shell is thickened and strengthened(higher than GB,JB,ANSI) And it can be made into or three sections if necessary. As a result ,the valve will not be distorted and locked because of gravity
The high-strength hard seal ceramic ball valve is designed for the media which contains fiber, slurry and high-hardness particle, applicable to pipe-line transportation and emission of Silicon powder ,magnesium powder and lime.
The ceramic ball and seat inside are hard sealed so that the valve can be zero leakage ,economical ,practical and earmarked for foreign trade.
材质表
| 序号 NO | 名称 Part name | 材料 Material | 序号 NO | 名称 Part name | 材料 Material |
| 01 | 阀体 Body | SS304 、 A105N | 11 | 阀杆 Stem | SS316 |
| 02 | 阀盖Body cap | SS304、A105N | 12 | 填料Packing | PTFE/Graphit |
| 03 | 阀球 Ball | 结构陶瓷 Ceramics | 13 | 填料压套 Gland | SS 304 |
| 04 | 阀座Seat | 结构陶瓷Ceramics | 14 | 碟型弹簧Disc spring | SS 304 |
| 05 | O 型圈 O-ring | 丁腈 硅胶 氟胶 NBR/VMQ/FKM | 15 | 压板 Glａnd flange | SS 304 |
| 06 | O型圈O-ring | 丁腈 硅胶 氟胶NBR/VMQ/FKM | 16 | 压板螺栓Bolt | SS 304 |
| 07 | 体盖螺栓 Cap bolt | A193-B7/SS304 | 17 | 限位片 Stopper | SS 304 |
| 08 | 体盖螺帽Cap nut | A193-B7/SS304 | 18 | 卡簧Circlip | SS 304 |
| 09 | 垫片 Washer | SS 316 | 19 | 套筒手柄 Handle lever | SS 304 |
| 10 | 轴套Stem sleeve | SS 304 | 20 | 手柄螺栓Hex bolt | SS 304 |
转矩及执行机构连接尺（Torque Values& Actuator mounting kits dimensions ）
| 规格 /SIZE | 法兰型号 Flange type | H | H1 | □ A х A | Φ B | Φ C | Φ D | E х E | |
| DN | NPS | ||||||||
| DN15 | 1/2″ | F05 | 89 | 12 | 9х9 | Φ23 | Φ50 | Φ 8 | 66х66 |
| DN20 | 3/4 ″ | F05 | 94 | 12 | 9 х 9 | Φ 23 | Φ 50 | Φ 8 | 66 х 66 |
| DN25 | 1″ | F05 | 94 | 12 | 9х9 | Φ23 | Φ 50 | Φ 8 | 66х66 |
| DN32 | 1-1/4 ″ | F05 | 102.5 | 14 | 11 х 11 | Φ 28 | Φ 50 | Φ 8 | 66 х 66 |
| DN40 | 1-1/2″ | F05 | 107.5 | 15 | 11х11 | Φ28 | Φ 50 | Φ 8 | 66х66 |
| DN50 | 2 ″ | F07 | 135 | 15 | 14 х 14 | Φ 46 | Φ 70 | Φ 10 | 99 х 99 |
| DN65 | 2-1/2″ | F07 | 145.8 | 18 | 19х19 | Φ46 | Φ 70 | Φ 10 | 99х99 |
| DN80 | 3 ″ | F07 | 160 | 20 | 19 х 19 | Φ 46 | Φ 70 | Φ 10 | 99 х 99 |
| DN100 | 4″ | F10 | 196.5 | 22 | 22х22 | Φ60 | Φ 102 | Φ 12 | 120х120 |
| DN125 | 5 ″ | F10 | 213.3 | 27 | 27 х 27 | Φ 60 | Φ 102 | Φ 12 | 120 х 120 |
| DN150 | 6″ | F10 | 235 | 27 | 27х27 | Φ60 | Φ 102 | Φ 12 | 120х120 |
压力实验（ Pressure Testing ）
| 规格 | DN | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 | DN65 |
| NPS | 1/2 ″ | 3/4 ″ | 1 ″ | 1-1/4 ″ | 1-1/2 ″ | 2 ″ | 2-1/2 ″ | |
| 扭矩 Torche Values/N.M | 空转（N.M）ldling | 5 | 10 | 10 | 15 | 15 | 25 | 30 |
| 气压 0.6Mpa | 10 | 15 | 15 | 10 | 20 | 30 | 55 | |
| 规格 | DN | DN80 | DN100 | DN125″ | DN150 | | | |
| NPS | 3 ″ | 4 ″ | 5 ″ | 6 ″ | | | | |
| 扭矩 Torche Values/N.M | 空转（N.M）ldling | 35 | 45 | 45 | 60 | | | |
| 气压 0.6Mpa | 70 | 90 | 100 | 100 | | | |
以上数据是在实验条件下测得，可能与阀门实际使用工况有所不同，仅供参考，建议与我司联系以应用正确的执行机构。
The date shown above was acquired under test conditions that may be very different form the actual site conditions, and for your reference ,it is recommended to contact us to help you select the suitable actuator.
您感兴趣的产品 PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
= 请输验证码
请输入计算结果（填写阿拉伯数字），如：三加四=7 