万喜堂app下载彩票 卧式电脑半自动单锅杀菌锅

万喜堂app下载彩票 卧式电脑半自动单锅杀菌锅 产品说明：

在广泛的范围内所取得的数据与成果基础上建立的设计与质量标准。

我公司拥有开发产品和制造方法所需的实验设备以及新的技术*适用于客户所提供各种食品及其容器。

运用当前*的工艺技术实现在控制，监测及校正的系统化。

万喜堂app下载彩票 卧式电脑半自动单锅杀菌锅

设备特点：

1 、罐内温度非常稳定、热分布均一,为保证罐内各点的热分布更均匀，热水喷淋系统在处理罐内每一个托盘的四个角上均设有一系列喷嘴。此外，将喷嘴设置在每一层托盘之间，因此可得到非常广泛的喷淋模式。由于从垂直安装在各托盘四个角上的喷嘴中连续喷淋水，使罐内温度在杀菌过程中的所有阶段始终保持稳定状态，从而减少了F值的变化及蒸煮过度等现象的发生。

2 、升温快

由于锅内只有少量循环水，并采用高效率换热器，所以，食品升温速度快，一般情况下，在蒸汽压力为0.6Mpa时，食品从20度升到121度，只需8分钟，这样可以大限度的保留食品的风味和色泽，也能降低能源的消耗。

3 、间接加热和冷却，阻止二次污染

循环水通过板式热交换器被间接地加热或冷却，同时在降温时，将同一处理用水通过板式热交换器连续进行循环冷却并冷却产品直至完成预定的杀菌处理过程。因此，再循环水在冷却之前已经被杀菌且设备上带有蒸汽冷凝水（纯净水）回收系统，作为杀菌用的循环水，杀菌完毕，锅内表面和包装袋表面的水滴晾干后，也不会留下白色的水垢小点，整个包装袋透明、干净，阻止二次污染。

4 、适合各种不同的包装物

由于在降温过程中，不是直接向锅内注入凉水，所以对于易碎的玻璃瓶包装，可以采取柔和的降温速度，避免由于温差过大引起瓶的破碎。这一特点也适合贝类的内容物，如蛤类，降温温差太大，或升温温差太大都会引起壳的破碎。

5 、完善的压力控制，适合含气包装的杀菌

我们已获得的压力平衡系统对内含气包装的杀菌至关重要，尤其是在升温或降温阶段，需要精确的压力控制。“PACKACE”控制系统可对处理罐内的温度和压力进行连续监测，并对罐内压力进行校正以便使其与包装内的压力相应。对于内含任何百分比的填充空气或气体的包装，或者在真空下密封的包装均可进行杀菌处理，而不会使包装或其内容物受到破坏或变形。本系统不同于其它系统，可将适用于任何产品的各种压力模式预先编制成程序输入计算机中。

6 、控制系统

   A 、利用屏幕进行触摸控制，而不是开关。

   B 、图表平板，不是刻度表。

   C 、所有时段均由模拟感应器和自动阀控制。

   D 、可以从单一杀菌工艺切换成多阶段杀菌工艺。

   E 、压力和温度呈数字化显示。

   F 、所有的过程都被记录在磁盘上。

7 、杀菌釜采用模拟温度控制系统，敲定多阶段加热机制

根据不同食品对灭菌条件的要求，随时设定不同的升温和冷却程序，可利用多阶段的加热的杀菌方式，使食品承受的热量限制到小*，以尽可能*地保存其风味、口感和色泽，使每一种食品均可在佳状态下进行调理灭菌。精确的杀菌温度（±0.5℃）可以避免因高温高压加工法而产生的蒸煮异味。

8 、测量F值的功能

我公司生产的每台喷淋式杀菌锅上都已安装了可配置测量F值的功能，F值软件每隔3秒进行一次F值计算。所有灭菌数据，包括灭菌条件、F值、时间－温度曲线、时间－压力曲线等均可通过数据处理软件处理后予以保存或打印，以便于生产管理。

9 、存储杀菌公式

电脑内少可存储30个杀菌公式。

Product description:

The design and quality standards established on a wide range of data and results are established.

Our company has the development of products and manufacturing methods required for the experimental equipment and the latest technology is fully applicable to customers to provide a variety of food and its container.

The use of the most advanced technology to achieve the control, monitoring and calibration of the system.

Equipment characteristics:

1, the tank temperature is very stable, uniform heat distribution, in order to ensure that the heat distribution of the points in the tank is more uniform, hot water spray system in the treatment of each of the four corners of the tray are equipped with a series of nozzles. In addition, the nozzle is arranged between each layer of the tray, so a very wide spray mode can be obtained. Because of the vertical installation of nozzle in the tray on the four corners of the continuous spraying water, the temperature in the tank at all stages in the sterilization process remain stable, thereby reducing the change and cooking F-measure excessive phenomenon.

2, fast heating

Because only a small amount of the circulating water, and the high efficiency heat exchanger, so food, fast heating speed, under normal circumstances, the steam pressure of 0.6Mpa, the food from 20 degrees to 121 degrees Celsius, only 8 minutes, so you can keep the food flavor and color of the maximum, can also reduce energy consumption.

3, indirect heating and cooling, to prevent the two pollution

The circulating water is indirectly heated or cooled by heat exchanger, while cooling, the same water treatment through the plate heat exchanger for cooling and cooling of the product until the completion of the scheduled sterilization process. Therefore, the water has been recycled with steam condensed water sterilization and equipment before cooling (pure water) recycling system, circulating water, as sterilization sterilization is finished, the inner surface and the bag of water droplets on the surface after drying, it will not leave the white scale small, the whole package is transparent, clean, prevent pollution two.

4, suitable for a variety of different packaging

Because in the cooling process, not directly into the pot into the cold water, so for the fragile glass bottle packaging, can take a soft cooling speed, avoid the temperature difference caused by the large bottle broken. This feature is also suitable for shellfish content, such as clams, cooling temperature difference is too large, or heating temperature difference will cause too much damage to the shell.

5, perfect pressure control, suitable for gas packaging sterilization

Our patented pressure balancing system is critical to the sterilization of gas - filled packaging, especially in the heating or cooling phase, requiring precise pressure control. The "PACKACE" control system can continuously monitor the temperature and pressure in the tank, and adjust the pressure in the tank so as to make it correspond to the pressure in the package. For any percentage of filled air or gas packaging, or in the vacuum sealed packaging can be sterilized, and will not make the packaging or its content is damaged or deformed. The system is different from other systems, can be applied to any of the various types of products in advance of the pressure model programmed into the computer.

6, control system

A, using the touch screen control, rather than switch.

B, chart flat, not scale.

C, all the time by the analog sensor and automatic valve control.

D, can be switched from a single sterilization process into a multi-stage sterilization process.

E, pressure and temperature are digital display.

F, all processes are recorded on disk.

7, sterilization kettle simulation temperature control system, to finalize the multi-stage heating mechanism

According to the different requirements of food sterilization conditions at any time, setting different heating and cooling program can be heated by multi-stage sterilization mode, so that the food under calorie restriction to the minimum limit, as far as possible to preserve the flavor, taste and color perfectly, so that every kind of food can be prepared in the best condition of sterilization under the. The accurate sterilization temperature (+ 0.5 DEG C) can avoid the cooking peculiar smell produced by the high temperature and high pressure processing method.

8, the function of measuring F value

My company produces each spray type sterilization pot has been installed on the F function can be configured to measure the value of the F value of the software every 3 seconds for a F value calculation. All sterilization data, including sterilization condition, F value, time temperature curve, time pressure curve can be saved or printed by the data processing software, so as to facilitate the production management.

9, storage sterilization formula

The computer can store at least 30 sterilization formula.