万喜堂彩票官网平台 LifeSpec II荧光光谱仪
万喜堂彩票官网平台 LifeSpec II荧光光谱仪由美盛科技中国有限公司供应



LifeSpec II 是紧凑、 集成、 高性能荧光生存期光谱仪设计用于高重复率脉冲飞秒和皮秒激光器。该系统是一个自动化的解决方案，在单个包为基本研究和实验室常规应用软硬件相结合。该系统的零时间色散光学测量超快衰变中设置技术性能的标准。

LifeSpec II 是与时间相关单光子计数 （TCSPC） 技术兼容和启用数字计数来降低背景噪音，实时的直接测量和观察和提取一次测量的长与短生存期与大、 小振幅。

LifeSpec II 功能世俗地消减双单色。这提供了光谱分辨率，而在同一时间消除了世俗的分散，禁止在较低的皮秒时间范围内准确生存期测量的影响。

我们*的软件控制仪器和允许超快数据采集和分析，让您看您的配置文件在屏幕上实时生成和**地操作和分析整个紫外/可见/近红外光谱范围内的数据。

数据采集模式从荧光衰减和通过时间分辨光谱范围到自动化的时间分辨各向异性测量和温度的地图。*短大生存期是依赖于探测器的速度和光源的脉冲宽度。通过应用数值 reconvolution 生存期在短短的 1/10 的系统的仪器响应函数还可以提取数据，以允许 LifeSpec II，涵盖的范围从 5ps-50µs。

LifeSpec II 的标准配置中提供一个探测器。具有两个探测器的配置可以上购买。LifeSpec **要求至少一个皮秒脉冲激光二极管、 脉冲 LED 或钛宝石激光 (用适合脉冲选取器） 的操作。该系统是高度可调光学平面可以设置之间 130 毫米-180 毫米.

万喜堂彩票

LifeSpec II

The LifeSpec II is a compact, fully integrated, high performance fluorescence lifetime spectrometer designed for use with high-repetition rate pulsed femtosecond and picosecond lasers. The system is a fully automated solution, combining hardware and software in a single package for fundamental research and routine laboratory applications. The system's zero temporal dispersion optics set the standards for technical performance in measuring ultra-fast decays.

The LifeSpec II is compatible with Time Correlated Single Photon Counting (TCSPC) techniques and enables digital counting to reduce background noise, real-time direct measurement and observation and the extraction of long and short-lifetimes with large and small amplitudes from a single measurement.

The LifeSpec II features a temporally subtractive double monochromator. This provides spectral resolution, while at the same time eliminates the effect of temporal dispersion which prohibit accurate lifetime measurements in the lower picosecond time range.

Our advanced software both controls the instrument and allows ultrafast data acquisition and analysis that lets you to watch your profiles build live on screen and comprehensively manipulate and analyse data across the UV/Vis/NIR spectral range.

Data acquisition modes range from fluorescence decay and time-resolved spectra through to automated time-resolved anisotropy measurements and temperature maps. The shortest measureable lifetime is dependent on the speed of the detector and on the pulse width of the light source. By applying numerical reconvolution, lifetimes as short as 1/10th of the system’s instrumental response function can be extracted from the data, allowing the LifeSpec II to cover the range from 5ps - 50µs.

The LifeSpec II in the standard configuration is supplied with one detector. A configuration with two detectors can be specified on purchase. The LifeSpec II requires at least one picosecond pulsed diode laser, pulsed LED or Ti:Sapphire laser (with suitable pulse picker) for operation. The system is height adjustable so that the optical plane can be set between 130mm - 180mm.

Download the Lifespec II Technical Specification

For more information please contact us