功能丰富 实时交流
移动端访问更便捷
订阅获取更多服务
关注获取更多资讯
实时接收采购订单
东莞市越联检测仪器有限公司位于东莞市寮步镇霞边村黄沙河西路 43 号,占地 3000 多平方米,建筑面积包括办公楼、展示厅、机械加工车间等 , 公司创立于 1997 年 , 是集研发、生产、销售 、进出口 为一体的综合性企业,多年来深获客户肯定。 本 公司 拥有自己的工业设计能力,产品外观质感均达良好,测控系统部门具有自主研发能力,开发之拉力机,*材料试验机测控系统具有良好稳定性能,功能达*水平,目前已被大量用户采用,稳定性能*,目前在*不断上升,研发产品,争取*客户是我司研发部门的主导方向.
越联检测仪器,*中心有:
广东拉力机,东莞拉力机,福建拉力试验机,广东拉力试验机,
上海拉力机,江苏拉力机,昆山拉力机,苏州拉力机,
江西拉力机,山东拉力机,福建拉力机,青岛拉力试验机,
广东试验机,江苏试验机,浙江试验机,上海试验机,广东检测仪器,
江西试验机,山东试验机,上海检测设备,浙江仪器检测,
江苏仪器设备,山东检测仪器,江西仪器检测,广东仪器检测。
YL-2208 盐水喷雾试验机
盐水喷雾试验机,乃针对各种材料表面处理,包含涂料、电镀、有机及无机皮膜、防锈油、化学处理之耐腐蚀质量试验,进而达到制品长时间之耐腐蚀性。
特点 :
● 该机采用进口 PVC 板制,内箱采用*的环带立体补强技术,结构强实,*变形。
● 试验室以五面加温方式加温,可确实掌握试验机室内之均温性。
● 喷嘴:采用伯努特定理吸取盐水而雾化,将使雾气扩散速度加倍,并自然落于试片上,其落雾量差可控制于± 0.3ml/80cm2H 。
● 饱和空气采用空气亨利定律 , 于以加热加湿 , 并提供试验室所需之湿度。
● 温度为直接影响腐蚀速率之先决条件,本公司采用 P.I.D 方式之温度控制器,控制误差± 0. 1℃ 以内。
● *使用全侦测系统,故障发生时,可亮灯显示。
型号 | YL-2208A | YL-2208B | YL-2208C | YL-2208D |
试验室尺寸( cm ) | 60 × 40 × 45 | 90 × 50 × 60 | 120 ×50×80 | 160 ×50×100 |
设备材质 | 进口 PVC 板材 &P.P | |||
试验室温度 | 盐水试验法 3 51 ±℃ 耐腐蚀试验法 50 ± 1 ℃ | |||
饱和空气桶温度 | 盐水试验法 47 ± 1 ℃ 耐腐蚀试验法 63 ± 1 ℃ | |||
盐水温度 | 35 ℃±1℃ | |||
时间记忆 | 0 ~999.9小时,停电记忆型,含蜂呜器 | |||
喷雾方式 | 连续式喷雾、喷嘴4000小时无结晶阻塞,特殊玻璃制 | |||
喷雾量 | 1.0~2.0 | |||
PH 值 | 盐水试验法 6.5~7.2 耐腐蚀试验法 3.0~3.2 | |||
试验室容积 | 108L | 270L | 480L | 800L |
电源 | AC220 V ±10% 1PH 50/60Hz |
YL-2208 Salt Spray Tester
Materials used:
1. Test chamber: use the PVC gray impact resistance plate (from Germany), 5mm in thickness;
2. Thermostat water tank: use the gray impact resistance plate of PVC (from Germany), 5mm in thickness and it is equipped with the auto water level controller to avoid the inconvenience to refill the water by manpower.
3. The upper cover of the test chamber: use the European transparent acrylic plate, 5mm in thickness;
4. The barrel for refilling the reagent: equipped with a built-in water level gauge. Use the gray impact resistance plate made of PVC , 5mm in thickness, which looks as an integral whole with the machine stand.
5. The basket supporter inside the test chamber: use the gray PVC impact resistance plate, the test angle can be freely adjusted to 15º and 30º
1.48 test pieces can be placed by the angle of 15 degree
2.30 test pieces can be placed by the angle of 30 degree
Note : the size of the test pieces is 150×70mm ( H×D )
6. The saturated air tank: made of stainless steel, 2mm in thickness and equipped with the auto water level controller to avoid the inconvenience to refill the water by manpower.
Application Temperature:
Set the type according to the standards of CNS, JIS and ASTM:
1. The test method of salt water:
The test chamber: 35 ℃± 1 ℃ / The saturated air barrel: 47 ℃± 1 ℃
2. The test method of corrosive resistant
The test chamber: 50 ℃± 1 ℃ / The saturated air barrel: 63 ℃± 1 ℃
Spraying modes:
1. Conical disperser: It can adjust the spraying and make the reek and falling reek even.
2. Nozzles(Taiwan): Glass nozzles. The accurate glass nozzles (self - made)
Note : volume of spraying: 1~2 mL/80CM2/1h(self-made)
Control system:
Temperature control of test chamber 0~99.9 ℃ with accuracy in 0.1 ℃ (LED with 2 figures) PID automatic
1. calculator(Yangming, Taiwan): 1 pc
2. Safe temperature controller for liquid expansion in heating channel 0~110 ℃ 2pcs.(made in West Europe)
3. The temperature controller of saturated air tank: 0~99.9 ℃ with accuracy in 0.1 ℃ .(LED with 2 figures), able, PID automatic calculator (Yangming, Taiwan): 1pc.
4. Time controller: ANLY AH5R-2 1pc.
5. Total timer: 0~9999.9 hr, RISESEN(made in Taiwan) 1pc.
6. The first stage pressure adjusting structure:
a) .First pressure regulating valve with a set of pressure gauge(pre-adjust To 2~2.5kg/CM2)
b).Second pressure regulating valve: pressure regulating valve (made in Taiwan) 1/4 " PT, pressure 0~4.0kg/ CM2, adjustable. (adjust the spraying pressure to 1.0kg CM2)
c).Pressure gauge: 2kg/ CM2(0.1kg/ CM2) 1pc
Safety devices:
◆ Water level controller 1set
◆ State warning lamp 3pcs.
◆ Protection switch for over temperature 2 sets.
Accessories:
1. Bracket for 1 set(can carry the weight of test samples under 2kgs).
2. 500g Nacl reagent contained in 2 bottles(contained in 4 bottles for standard type)
3. 10kg barrel for salt water making 1pc.
4. 80cm2 standard collecting cup 1pc.(2pcs. for standard type)
5. 50ML graduated cylinder 1pc.(2pcs. for standard type)
6. The detailed operational manual and standard documentation. 1 copy
*您想获取产品的资料:
个人信息: