07MK92 ABB高宝印刷机,淘工控商城近期现货上架同类型产品还有:07AI91C GJR5251600R0202、07KT94G GJR5252100R0161。
07MK92 ABB高宝印刷机销售中心下面介绍高宝印刷机报警翻译:
Troubleshooting
故障排除
574 Printing unit 2: Message no or incorrect mode selected574 印刷机2 信息:没有选择模式或选择
了错误的模式
a) The operating mode necessary for this function has not been selected, or the incorrect operating mode has been selected.
a) 没有选择适合该功能的操作模式,或选择了错误的操作模式c) Function cannot be activated.
c)功能无法激活
Select the correct operation mode.
选择正确的操作模式
575 Printing unit 2: Message motor protection switch damping solution refrigerator575 印刷机2: 信息电机保护开关
润湿液
冷冻机
a) Protective switch has triggered.
a) 保护开关已触发
b) Overheating, short circuit
b)过热,短路
c) Functional unit is no longer operational.
c)功能部件无效
Inform electrician.
通知电工
576 Printing unit 2: Message motor protection switch lateral regster576印刷机2:信息电机保护开关侧边定位
a) Protective switch has triggered, motor at circumferential register is out of operation.
a)保护开关已触发,周边定位的电机停止运行b) Overload
b)过载
c) The indicated register cannot be adjusted.
c)无法调节所指示的定位
Remedy cause of fault.
纠正故障原因
Check motor and connection cable.
检查电机和连接电缆
577 Printing unit 2: Message motor protection switch sheet thickness577 印刷机2: 信息 电机保护开关 薄板厚度
a) Protective switch has been triggered, the motor for the adjustment of the printing unit to the sheet thickness is out of function.
a)保护开关已触发,调节印刷机薄板厚度的电机故障。
b) Overload.
b)过载
c) Check motor.
检查电机
Calibration of the measuring unit at the potentiometer.
校准电位计上的测量装置
578 Printing unit 2: Message motor protection switch circumferential register578 印刷机2: 信息 电机保护开关 周围定位
a) Protective switch has triggered, motor at circumferential register is out of operation.
a)保护开关已触发,周边定位的电机停止运行b) Overload
b)过载
c) The indicated register cannot be Remedy cause of fault.
纠正故障原因
Check motor and connection cable.
检查电机和连接电缆
Troubleshooting
故障排除
adjusted.
c无法调节所指示的定位
600 Printing unit 2:
Minimum speed reached
600 印刷机2: 达到zui低速度
a) The printing machine has reached its minimum speed.
a)印刷机已达到zui低速度
Message/Fault 信息/错误
i) Meaning b) Cause c) Effect
a)含义
b)原因
c)结果
Description/Help 说明/帮助
650 Printing unit 2: Message stairs open
650 印刷机 2: 信息 楼梯是开的
a) Stairs are open.
a)楼梯是开的
b)
c) Arm cannot be opened.
c)扶手打不开
Close stairs.
关上楼梯
669 Printing unit 2:
Maximum speed reached
669 印刷机2: 达到zui高速度
a) The printing machine has reached its maximum speed.
a)印刷机已达到zui高速度
699 Printing unit 2:
Message protective grating
impression cylinder
699 印刷机2 保护栅栏压印滚筒
a) Protection equipment was opened.
a)保护设备打开
c) Unit stops immediay.
c)设备立即停机
Close protection equipment.
关闭保护设备
853 Printing unit 2: Message safety clamp open853 印刷机2 安全夹头打开
a)Protection equipment was opened.
a)保护设备打开
c) Unit stops immediay.
c)设备立即停机
Close protection equipment.
关闭保护设备
869 Printing unit 2: Message extension arm is open869 印刷机2 延伸臂是打开的
a) Sheet gate and platform is folded up.
a)薄板门和平台被折叠起来
c) Unit stops immediay.
c)设备立即停机
Put gate and platform in operation position.
将门和平台置于操作位置
Troubleshooting
故障排除
895 Printing unit 2: Message sheet-feed stop895 印刷机2薄板进料停止
a) Sheet travel was stopped from the display at the printing machine inlet.
a)印刷机进口显示处的薄板输送停止
939 Printing unit 2: Message lubrication
939 印刷机
2:信息润滑
a) Lubrication fault
a)润滑故障
c) Check the hoses.
检查软管
940 Printing unit 2: Message protective cover drive shaft nose 940 印刷机2保护罩传动轴头
a) The indicated protection equipment
has triggered.
a) 保护设备已触发
c) Unit stops immediay.
c)设备立即停机
Close protection equipment.
关闭保护设备
941 Printing unit 2: Message protective cover inking unit941 印刷机2:信息保护罩上墨装置
b) Protection equipment was opened.
a)保护设备打开
c) Unit stops immediay.
c)设备立即停机
Close protection equipment.
关闭保护设备
942 Printing unit 2: Message protective grating impression cylinder942 印刷机2: 信息 保护栅栏 压印滚筒
Protection equipment was opened.
a)保护设备打开
c) Unit stops immediay.
c)设备立即停机
Close protection equipment.
关闭保护设备
943 Printing unit 2: Message protective grating sheet outlet943 印刷机
2:信息保护栅栏 薄板出口
Protection equipment was opened.
a)保护设备打开
c) Unit stops immediay.
c)设备立即停机
Close protection
equipment.
关闭保护设备
Message/Fault
信息/错误
j) Meaning b) Cause c) Effect
a)含义
b)原因
c)结果
Description/Help
说明/帮助
944 Printing unit 2: Message protective grating sheet inlet topa) Protection equipment was opened.
a)保护设备打开
b) Close protection equipment.
关闭保护设备
采购可直接郭: