万喜堂app下载网页版 无热式空气除湿干燥机

特点
Features

▲ 采用PLC人性化控制操作
▲ 不锈钢双层保温料筒
▲ 热风循环装置(避免热风向外排放造成环境污染和浪费 电能源)
▲ 压缩式除湿露点达到-40摄氏度以下。比蜂巢式和双缸 式除湿机节能30%(因不需要冷却再生风源)
▲ 全自动供料方式，(三机一体)，(二机一体)，(一机一体)
▲ 可解决:表面水纹、熔接痕、银丝纹、表面缩水、表面光洁度、透明度、强韧度、白点、黑点等！

▲ Adopt PLC humanized control operation
▲ Stainless steel double insulation barrel
▲ The hot air circulating device(avoid hot air outward discharge of polluting the environment and wasting electric energy)
▲ Compression dehumidification dew point temperature reached-40 degrees celsius.Ratio of honeycomb type and double cylinder type dehumidifying machine energy conservation 30% (because it does not need the cooling regenerative air)
▲ Fully automatic feeding means (three machine of an organic whole), (the second one),(one machine one)
▲ Can solve:surface water, weld lines, silver marks, surface shrinkage, surface finish, transparency, toughness, white, black and so on!

产品简介
Introduction

现在，工程塑料的成型工艺正相应于产品质量和生产效率的严格要求，追求着高精度，高品质，高效利用，降低成本等的高工艺。

▲“文惠牌万喜堂app下载网页版 无热式空气除湿干燥机"是能在稳定的低温露点进行干燥处理,限度地发挥树脂的特性,高效率并为节能型的除湿干燥机。
▲“文惠牌万喜堂app下载网页版 无热式空气除湿干燥机"不受一切因季节，时间的变化而造成的温度差的影响，能实现稳定的理想干燥。其原因，使先让含有湿气的空气在除湿功能(干燥剂)下干燥到-40摄氏度以下，再用这样的干燥空气使塑胶颗粒干燥的。

循环方式

是通过:*被密封的送风机→高温箱→原料料斗,这样的一系列循环回路让一定量的空气进行循环.并在这里一点点地少量注入超过低温露点的干燥空气以达到干燥的方式。注入的干燥空气和相同量的吸潮空气从料斗排出。

Now, engineering plastic molding process is corresponding to the product quality and production efficiency of the strict requirements, the pursuit of high precision, high quality, efficient utilization, reduce the cost of high technology.

▲ "Wenhui dehumidifying dryer"is in the stable low temperature dew point drying treatment, maximizing the resin properties, high efficiency and energy-saving dehumidifying dryer.
▲ “Wenhui dehumidifying dryer"from all due to season,time changes caused by temperature difference, often can achieve stable ideal drying.Its reason, to let containing moisture air in drying dehumidification function (desiccant) to -40 degrees celsius, then drying air to dry plastic particles.

Circulation mode

Through: completely sealed fan, high temperature box to raw material hopper, such a series of loops have a certain amount of air circulation, and here a little amount of injected over the low temperature dew point dry air drying way to achieve. Injection of dry air and the same amount of moisture absorption of air discharged from the hopper.

使成型品的质量提高
受潮的塑胶颗粒会产生强度和韧性减低的情况。机能部件(透明产品不透明)如有这样的肉眼难以发现的实质性的缺陷，则是因干燥不充分而导致了加水分解的结果，并且总是成为生产出不合格产品的主要原因。

The molded product quality improvement
Damp plastic particles will have strength and toughness reduced circumstances. Function part (transparent product opaque) such as the naked eye is difficult to find the substantial defects,is not sufficient for drying caused water decomposition results,ａnd always become the production of unqualified products are the main cause of.

做出漂亮的外形
受潮的塑胶颗粒使成型品产生如银色条纹、气泡，烧痕，闪光等不良的外观，致使价格昂贵的塑胶颗粒浪费是一种很大的损失。

Make beautiful appearance
Damp the molding plastic particles such as silver stripe, bubble, burns, flash and other undesirable appearance, cause the price expensive plastic particles waste is a big loss.

使规格精度提高
高机能的部件越精密就越需要让严密的规格精度产品稳定成型，受潮的塑胶颗粒对于规格精度有微秒的影响。

The specifications of precision
High performance parts more precision is required to make strict specifications of precision products stable molding moisture plastic particles for specifications precision microsecond.

金属模具的维修变得简单
塑胶颗粒的干燥不够充分时，容易产生原料的有害气体。金属模具的维修频率增高会影响生产效率。

Metal mold repair becomes simple
Plastic particles of dry enough, easy to produce materials harmful gas, metal mold repair frequency increases will affect the production efficiency.